|
Post by AxeHandle on Oct 16, 2019 14:50:10 GMT -5
Pork chops and pinto beans last week. This week is still up in the air.
|
|
|
Post by AxeHandle on Oct 17, 2019 5:59:44 GMT -5
|
|
|
Post by AxeHandle on Oct 17, 2019 6:06:05 GMT -5
|
|
|
Post by AxeHandle on Oct 18, 2019 6:24:29 GMT -5
Friday? I'll be on the range from 0900 until 1800... Might be a little shooting. Pulled out my 32 Ruger SP101 yesterday and was pleasantly surprised at how well the 98 grain DEWCs shot. 3500 rounds from a pound of powder isn't bad. Get the buddy deal on bullets too! Maybe the LCR today.
|
|
|
Post by AxeHandle on Oct 19, 2019 5:47:21 GMT -5
Saturday? Shooting! Burned up all the 32 and 44 yesterday. Still holding 22, 38, and 45.... The 625s may move to the front of the line..
|
|
buzz1761
.30 Stingray
West Central Florida
Posts: 186
|
Post by buzz1761 on Oct 19, 2019 8:36:07 GMT -5
Axe what load do you use in the 625.
Thanks, Buzz
|
|
|
Post by AxeHandle on Oct 19, 2019 12:32:20 GMT -5
Same load I shoot in my paper punching 1911s. 3.8 grains of bullseye with a 200 grain lead SWC and a Federal primer.
|
|
|
Post by tomcorr on Oct 20, 2019 0:13:51 GMT -5
Where you have the most armed citizens in America, you have the lowest violent crime rate.
Where you have the worst gun control, you have the highest crime rate.
|
|
|
Post by tomcorr on Oct 20, 2019 0:16:01 GMT -5
I have a very strict gun control policy: if there's a gun around, I want to be in control of it.
|
|
|
Post by AxeHandle on Oct 20, 2019 6:22:43 GMT -5
Sunday? Church! Need to get to the loading bench too...
|
|
buzz1761
.30 Stingray
West Central Florida
Posts: 186
|
Post by buzz1761 on Oct 20, 2019 9:34:46 GMT -5
Axe, Do you have a favorite load using unique for 45, 38. I have a lot of that on hand, that has to be used.
Thanks, Buzz
|
|
|
Post by AxeHandle on Oct 20, 2019 14:21:21 GMT -5
Unique has never been a favorite of mine for paper punching stuff.. Lots of people like it and lots of loading data published.
|
|
|
Post by AxeHandle on Oct 21, 2019 5:32:27 GMT -5
Monday? Shooting today! Looking at Magma Engineering bullet molds for my Magma Master Caster. A nice DEWC for 32 and 38 would be nice.
|
|
|
Post by magnumwheelman on Oct 21, 2019 6:23:59 GMT -5
got a 22 rifle I'm trying to identify... thread posted in the rifle section... appreciate any help I can get... Thanks
|
|
|
Post by bula on Oct 21, 2019 6:54:17 GMT -5
Am up early. The fine folks from Cable TV due here 9-10am.. Cable went wonky Fri evening. Was trying to watch those episodes of River of No Return but something wrong. So deleted them. Went back to regular signal channels and same same. GRRrrr ! Deleted for nothing. Sigh. So have limited channels on smaller TV in the dining room. Wife have been in Fla for near 3 weeks now and I'm doing both our chores and work, and hour drive each way..leaf season, etc.. Burned out and lost too much sleep and took a vacation day today. Oh, a young camp member got an 8pt buck Fri eve and then topped that by getting a bear with his muzzle loader Sat.!
|
|