|
|
Post by 2 Dogs on Feb 8, 2012 10:25:10 GMT -5
Ok, These are custom machined new front sight blanks. They will be available for the BFR, Ruger Single Six, and others. They are also available for the 7.5 Shootists Bisleys and the like that came with a too short front sight with or without the screw hole. We are also working on a replacement blade for the 10.5" Ruger BHs. These blanks are ready to be finished with serrations, gold bars, brass bead etc. They are just a bit taller than stock to allow you to file them to your desired height. Cost is 59 dollars each plus shipping. Pictured here is the updated version, a more purposeful looking sight that the original.   Single Six Front sights:Tas6691 1 Barranti 1 StanG 3 COR 1 Flatlander 2 Bushhog 3 Dutch41 1 Kaytod 2 Ruger 7.5" BisleyBudM 1 no screw hole BudM 1 w screw hole Caz 1 w screw hole TomR 2 w screw hole Ruger 10.5"Flatlander 1 BFRsTimM 3 Otto 2 Subsonic 2 Kaytod 1 Buckheart 1 Stan 2 |
|
|
|
Post by AxeHandle on Feb 8, 2012 19:50:10 GMT -5
So... When and where to we send the money? Got a delivery schedule hammered out?
|
|
|
|
Post by bigbores on Feb 8, 2012 20:21:48 GMT -5
2 Dogs,
The sights look great! Great Job!
You should be seeing the BFR in the mail any day now if you haven't already.
Thank you for offering these to everyone and being so flexible with them.
To me good sights are really important, these should really help.
|
|
|
|
Post by 2 Dogs on Feb 8, 2012 20:39:02 GMT -5
You are welcome Sir. Like I said, while I am not making anything on these sights myself, I do enjoy helping out the guys when I can.
|
|
|
|
Post by 2 Dogs on Feb 8, 2012 20:40:02 GMT -5
Stan, he is going to hammer out the SS sights first. I will let you know. These custom items dont just whipped out you know!
|
|
|
|
Post by subsonic on Feb 8, 2012 20:45:31 GMT -5
Thank you!
Let me know when payment is due.
|
|
|
|
Post by 2 Dogs on Feb 8, 2012 20:51:04 GMT -5
As soon I get the BFR sight we will have a better idea as to dimensions, height, and proportion. Will advise.
|
|
|
|
Post by subsonic on Feb 8, 2012 20:53:24 GMT -5
Do you want to post this on the cast boolits wheelgun forum? There are a bunch of BFR junkies lurking over there.
|
|
|
|
Post by whitworth on Feb 8, 2012 21:09:41 GMT -5
Finally a solution to the factory front sight on the BFR!
|
|
|
|
Post by 2 Dogs on Feb 8, 2012 21:10:20 GMT -5
Sure. Tack the link over there if you want. I already have it in swappin and sellin. Just keep in mind we have to be able to match the BFR barrel taper and I wont get the sight till next week to be sure!
|
|
|
|
Post by 2 Dogs on Feb 8, 2012 21:12:10 GMT -5
One of you guys measure your BFR barrel at the front and back of the front sight ramp. How tapered is that barrel?
|
|
|
|
Post by bushog on Feb 8, 2012 21:13:46 GMT -5
Fermin, I'll take 3 for the Single Six.
Greg
|
|
|
|
Post by Tom Richardson on Feb 8, 2012 21:16:07 GMT -5
Fermin,
I need a hole for a screw in each of mine.
A screw hole and a pop rivet and I will be ready.
|
|
|
|
Post by subsonic on Feb 8, 2012 21:47:29 GMT -5
One of you guys measure your BFR barrel at the front and back of the front sight ramp. How tapered is that barrel? On both of my 7.5" short cylinder guns .475 & .500JRH, the barrel doesn't taper at all from the frame to the muzzle. .820" the whole way. |
|
|
|
Post by 2 Dogs on Feb 9, 2012 5:53:36 GMT -5
Ok, no taper to worry about, Im relieved!
|
|
