|
|
Post by magnumwheelman on Sept 24, 2019 7:00:38 GMT -5
|
|
|
|
Post by contender on Sept 24, 2019 8:41:38 GMT -5
I have a Match Champion in 10mm. I used it this past weekend in my USPSA match. A few guys there who enjoy revolvers were unaware of that model. I may have sold one or two,,,,!  It takes the same moon clips as my S&W 646,, so I was already set up for fun! |
|
|
|
Post by magman on Sept 24, 2019 8:59:02 GMT -5
Didn't know they had an MC in 10mm. Had I known, would've bought that rather than a 610.
|
|
|
|
Post by bigbrowndog on Sept 24, 2019 10:37:45 GMT -5
Really liking the 3” gun,....missed out on a SW shorty, may have to look harder at that one.
Trapr
|
|
|
|
Post by magnumwheelman on Sept 24, 2019 10:52:54 GMT -5
I like that the 357 2.5" snubbie is available in a 7 shot too... I really don't need another 357, but like the idea of a 7 shot snubbie...
|
|
|
|
Post by rjm52 on Sept 25, 2019 8:39:34 GMT -5
Have got a standard 4" stainless .357, 4" MC 10mm and had a 4" .327 that I let a friend have...all are great guns. I especially like how easily the front sight blade can be changed out...
S&W has not seen any of my new gun revolver money in about 10 years...
Bob
|
|
|
|
Post by leadhound on Sept 27, 2019 10:31:40 GMT -5
If only a 6" full lug 10mm!
|
|
|
|
Post by ezekiel38 on Sept 27, 2019 11:30:12 GMT -5
Want a 3" adjustable sighted GP in 357 or 10mm. They made a small run in 357 back in 14 but they are now like hen's teeth to find. Six shot only in 357 due to fact I have a MC in 357 and an L frame 6 round. All my speedloaders are for 6, don't want to add to the confusion.
|
|
|
|
Post by ezekiel38 on Sept 27, 2019 11:31:12 GMT -5
DOUBLE POST, PLEASE DELETE!
|
|
|
|
Post by wheelguns on Sept 27, 2019 18:26:18 GMT -5
When the 7 shooters first came out, certain factory ammo wouldn’t chamber because the rims bound up on each other. It was determined that the offending ammo with the large rims, was within saami specs. I am not sure whatever became of this, but it is something to investigate before buying a 7 shot.
|
|
|
|
Post by rexster on Sept 29, 2019 11:29:19 GMT -5
While not on the GP100 platform, but built on the SRH frame, there is, now, the Super GP100. While it is an ugly duckling, I appreciate its utility. I did not buy it for ICORE, but because I saw it as a 21st-Century Dragoon, a fightin’ pistol. (Yes, revolving pistol, as Sam Colt’s patent says.)
Some say that the “gills” are “slanted the wrong way.” I do not worry about that, seeing them as traction grooves, for the time a gunfight might get so close that I might want to have a hand on each end of the weapon.
|
|
groo
.327 Meteor
I yet live!!!!
Posts: 855
|
Post by groo on Oct 9, 2019 17:43:31 GMT -5
Groo here
I got the GP100 3in 10mm WC some time ago..
With full up loads [ aka Underwood ,BB,Corbon, Double tap etc] It is quite a hand full.
Haven't tried 40S&W yet but range remington is quite nice.
Ps Ranch products has full and 1/3 moon clips.
The clip is really for the ruger speed six made for a French contract.
A quick check shows the hole spacing and extractor groove are the same...
|
|
ruger.com/products/gp100MatchChampion/specSheets/1775.html
ruger.com/products/gp100MatchChampion/specSheets/1775.html
