|
Post by Encore64 on Aug 2, 2019 15:17:29 GMT -5
Picked up one of these today in excellent shape. I'd say probably 98% condition.
Measures out nicely. Throats are all six an even .452". Barrel gap is a tight .0025". Locks up rock solid.
Have been wanting an 45 Auto Rim. Think this fit the bill.
Any information and opinions appreciated...
|
|
|
Post by wheelguns on Aug 2, 2019 15:40:24 GMT -5
Sounds like a great revolver!
|
|
|
Post by Encore64 on Aug 2, 2019 16:23:40 GMT -5
I'm not the World's biggest Smith Fan. Not even a big fan of Double Actions. But, I do tend to like the "N" Frame guns.
Nothing against them, just always leaned towards Single Actions.
|
|
rg
.240 Incinerator
Posts: 15
|
Post by rg on Aug 2, 2019 16:45:04 GMT -5
I've got a model of 1988, and its a great shooter!
|
|
|
Post by bullseye on Aug 2, 2019 18:10:48 GMT -5
They're outstanding shooters. I owned a 5" for 20+ years which I shot Bullseye matches with twice a week & achieved excellent results. I currently own 3" & 4" versions & my 4 incher is currently set up for Bowling Pin Matches at my local gun club...Also with excellent results. Mine thrive on cast bullets in the 250-270 gr range roll crimped in AR brass, or ACP in Full Moon clips for the Pin Matches in which a quick reload is needed.
|
|
|
Post by Encore64 on Aug 2, 2019 19:05:20 GMT -5
Mine is 5" and has been given an action job which includes CCH Hammer, Trigger and Internals.
I'm pretty ignorant to Smiths...
|
|
|
Post by deaconkc on Aug 2, 2019 19:16:32 GMT -5
|
|
|
Post by jimtx on Aug 2, 2019 22:35:25 GMT -5
I have the 625 PC only Hillary lock gun I own and prolly will except a 25-14. It’s very nice
|
|
|
Post by Encore64 on Aug 3, 2019 5:26:02 GMT -5
I bought this one mainly to help a friend out. But, I've always wanted a gun that fired the 45 Auto Rim too. So, a lot of persuading wasn't required.
Spent last night cleaning the gun and removing 30 years of handling marks.
I'd say the gun is an over priced toy. I don't competition shoot and it's definitely not a hunting gun.
Still no regrets...
|
|
|
Post by Ken O'Neill on Aug 3, 2019 5:56:47 GMT -5
I bought two Models of 1988 when they were first introduced. All the '88's were 5" guns. Then, I bought a 4" Model of 1989, and later mounted an UltraDot on it. All of these were great revolvers. The 5" guns were used primarily in Bowling Pin matches. The '89's came in 3",4" and 5" barrel lengths. I didn't like the Pachmayrs that came on the guns, and replaced them with Hogue grips, which fit my hand better, and replaced the ramp front sights with patridge posts. Around the turn of the century, I sold all three. Foolish. Enjoy your new gun!
|
|
|
Post by mike454 on Aug 3, 2019 6:26:05 GMT -5
My 625-4 is one of the Springfield armory commemorative mountain guns in 45 acp. Would be one of the last guns I sell. I use the BMT mooner clip reloader. Was a lot cheaper when I bought mine but works well.
|
|
|
Post by hughree on Aug 3, 2019 6:41:42 GMT -5
I purchased a 5" in 1988. Around that time, John Taffin has a review published in American Handgunner. It was a great review and worth locating. I subsequently acquired 3" and 4" versions of the Model of 1989. Still have them all but don't shoot them as often as I should. They are fine firearms.
I confess to a strong bias for Smith & Wesson N frames in .45 ACP/AR and .45 Colt. I have enjoyed every minute spent with Model 25's, 625's and a 325.
|
|
|
Post by dale53 on Aug 3, 2019 8:04:12 GMT -5
I had an S&W 625-6 with 5" barrel, that is now happily owned by my youngest son. It and my 625-8 JM Special are two of the finest revolvers I have owned and that has been a bunch. Both came with perfect cylinder throats at .452" and seem to shoot, with target accuracy, everything I put in them. I have shot nothing but my own cast bullets in them. My favorite load is a target load of 4.0 grs. of Bullseye or equivalent behind a Mihec version of the H&G #68 (200 gr. SWC). I use Starline Auto Rim cases mostly at the range but have a supply of Military large primer ACP cases when I want or need a quick reload. For "Serious use", my ACP cases get Ranch Products steel full moon clips (require tools to moon and demoon). For general range and field use, I prefer the Rimz polymer full moon clips. They can easily be loaded and unloaded with the fingers. They come in two types (polymer and polymer/hydrocarbon). I prefer the stiffer of the two. The website can be a bit confusing, so I recommend you have your revolver in hand, and call to order. Different .45 ACP revolvers take different model clips. www.ezmoonclip.com/page_4.htmNOTE: If you require a speedy reload when using ACP cases and full moon clips, the design of the bullet is critical. My favorite (#68) bullet does NOT load fast because of the shoulder on the bullet. The Lee 230 gr. TC bullet is my choice for a quick reload. Most any of the popular "round-flat" nose bullets load very well. Note #2:Steel full moon clips retain the cases better if dropped. RIMZ cases are much easier to load and unload for non critical use. YMMV My 625-6 with 5" barrel and a Simmons 30mm Red Dot sight: My 625-8 JM Special: FWIW Dale53
|
|
|
Post by rjm52 on Aug 3, 2019 10:17:26 GMT -5
"I'd say the gun is an over priced toy. I don't competition shoot and it's definitely not a hunting gun."
Hardly a toy and makes a fine hunting gun....
These 625s will run .45 Super with ease... Talked to one of the guys at Buffalo Bore when I was making an order and he says he runs their .45 Super in his all the time and they have a large customer base that does also....
You didn't say what barrel length you have...3, 4 or 5....
Bob
|
|
|
Post by Encore64 on Aug 3, 2019 11:13:51 GMT -5
My gun is the 5"...
I choose not to shoot anything above +P Pressures in mine. Just a personal choice as I have far better suited guns for that. But, I have no doubt the gun will handle it fine.
Think this gun will just be a target gun. Maybe occasionally busting a few turtles out of my ponds. With three ponds on the place, no shortage of them for sure.
|
|