snappy
.30 Stingray
Posts: 421
|
Post by snappy on Mar 14, 2017 23:04:59 GMT -5
Most excellent Sir.
|
|
|
Post by lscg on Mar 15, 2017 1:51:57 GMT -5
sweet!
you're on a six gun roll!
|
|
|
Post by rjm52 on Mar 15, 2017 9:20:31 GMT -5
..as a .41 Lover that is beyond WOW.... Really love those sights...
What are you going to feed it?
Bob
|
|
cmh
.401 Bobcat
Posts: 3,745
|
Post by cmh on Mar 15, 2017 10:13:03 GMT -5
😲😲😲😲😲😲 thats beautiful!!! Congrats 😊
|
|
|
Post by Ken O'Neill on Mar 15, 2017 15:54:14 GMT -5
The only word I can squeeze out is "WOW"!
|
|
|
Post by arokcrwlr on Mar 15, 2017 16:06:23 GMT -5
That is absolutely outstanding!
|
|
|
Post by Rimfire69 on Mar 16, 2017 7:02:25 GMT -5
That's real nice.
|
|
dhd
.327 Meteor
Posts: 941
|
Post by dhd on Mar 16, 2017 7:38:35 GMT -5
The 3rd screw on the left is for a cylinder latch block of some sort? The more I look at custom Ruger BH's, the more I like big long cylinders that fill the frame window. Subtle, but like a set of fitted grips, finishes the look of a fine revolver.
|
|
gjn
.30 Stingray
Posts: 491
|
Post by gjn on Mar 16, 2017 9:06:05 GMT -5
Simply Magnificent! Look forward to a range report.
|
|
|
Post by potatojudge on Mar 16, 2017 9:36:55 GMT -5
The 3rd screw on the left is for a cylinder latch block of some sort? The more I look at custom Ruger BH's, the more I like big long cylinders that fill the frame window. Subtle, but like a set of fitted grips, finishes the look of a fine revolver. Yep, that's a bolt bearing block. Maybe Bushog will chime in here about why the screw is external. It's my understanding that Bowen etc have moved away from the external screw (for aesthetics, functionally it's just as good SFAIK). I think the external screw in addition to slotting the pins is a neat look. Guns that use a hex screw in the external block don't look nearly so nice, but Bushog's arrangement is classy. Is the hammer carbon or stainless? Can't tell with those colors and with people CCHing stainless now. The chambers are standard 41 mag, not 414 cut down I assume?
|
|
|
Post by ezekiel38 on Mar 16, 2017 10:25:33 GMT -5
What a niece revolver! Now for the leather to compliment that fine piece. And you need to shoot it! Pics of all, please!
|
|
|
Post by foxtrapper on Mar 16, 2017 11:20:44 GMT -5
Beautiful!
|
|
dhd
.327 Meteor
Posts: 941
|
Post by dhd on Mar 16, 2017 11:26:49 GMT -5
I assumed it was a bolt bearing block (it just about had to be) but I haven't seen it having been secured externally before. I personally don't think I detracts from the looks in the least. I know what it does and can see how it helps with the heavy calibers, but is it necessary for lighter recoiling calibers? I tend to over engineer things because I only want to send a gun off once.
Sorry for the off topic question, but I don't think it detracts from the fine revolver being discussed.
Thanks,
|
|
|
Post by arokcrwlr on Mar 16, 2017 12:39:06 GMT -5
Some smiths will tell you that unless you're going to a 5-shot conversion that the bolt bearing block is not necessary. At least that is what a couple have told me. Having said that, it certainly wouldn't hurt to have it.
|
|
Yetiman
.327 Meteor
Enter your message here...
Posts: 581
|
Post by Yetiman on Mar 16, 2017 12:42:55 GMT -5
I know what it does and can see how it helps with the heavy calibers, but is it necessary for lighter recoiling calibers? I tend to over engineer things because I only want to send a gun off once. Installing and fitting the bolt bearing block and trigger pivot spacer (plus a fitted over size base pin in line reamed holes) is done to insure tight, accurate cylinder lock up (along with line boring the cylinder). It is not lost on lighter recoiling calibers. It's all about precision.
|
|