|
Post by cherokeetracker on Dec 11, 2016 8:40:33 GMT -5
I have shot the 350 or maybe they are 360 gr with 16-19 grs of Longshot. 16 grs of Longshot was the most accurate. They really worked well out of my Rossi Trapper. Better than my Black Hawk. ( w/ 4 5/8 Barrel) So I will be curious of your results. Good Luck with this.
Charles
|
|
|
Post by serialsolver on Dec 11, 2016 11:34:48 GMT -5
Thanks, I'm having fun with this gun and working up loads for it. The BH grip frame went back on today and I'll shoot it with the same loads to see which one I like best. I'm also curious how those notches were cut, something similar might be my next step. I cut the notches with a small grinding wheel from my dremel chucked in my drill press. Then centered the vise under the grinding wheel opened to about an inch so the cylinder would rest in the open vice and I could press the cylinder against the grinding wheel till it notched the cylinder at the rear of the chamber. Hope this helps and sorry for the slow reply.
|
|